PE-280
MAINTENANCE
X7502313601
27
© 3/2015 ECHO Inc.
Gear Housing
1. Remove plug (A) and add grease to gear housing. Do not
over-fill.
2. Replace plug and tighten securely.
Drive Shaft
1. Loosen two (2) screws (B) and remove center locating
screw (C). Pull gear box and shield from drive shaft housing.
2. Pull flexible cable from the drive shaft housing, wipe clean
and re-coat with a thin coating (15 ml [1/2 oz.]) of grease.
3. Slide the flexible cable back in the drive housing. DO NOT
get dirt on the flex cable.
4. Install the gear housing and shield assembly. Align locating
screw hole with hole in drive shaft housing.
5. Tighten screws securely.
Edger Blade Replacement
Level 1.
Note: Replace blade when it is bent, damaged, or worn shorter than 6 inches.
1. Remove split pin (A).
Parts Required:
Blade, new split pin
B
A
C
B
C
A
G
Summary of Contents for PE-280
Page 34: ...34 X7502313601 3 2015 ECHO Inc NOTES PE 280 NOTES...
Page 36: ...36 X7502313601 3 2015 ECHO Inc NOTES PE 280 NOTES...
Page 37: ...PE 280 NOTES X7502313601 37 3 2015 ECHO Inc...
Page 38: ...38 X7502313601 3 2015 ECHO Inc NOTES PE 280...