Exmark 142-6386, Setup Instructions

Page: 1 / 7

COLLECTION SYSTEM
142-6386, 142-6387, 142-6388
Setup Instructions
For Bagger Serial Nos. 408,644,346 & Higher
(To fit Quest Units Serial Nos. 408,644,346 & Higher)
Loose Parts
Use the chart below to verify that all parts have been shipped. Part numbers not shown are available on the dealer
extranet.
Dealer Pack
Part No. Description Qty. Use
— Bolt (3/8 x 1 inch) 4
— Locknut (3/8 inch) 6
—
Bracket-Mounting, Left weight
1
—
Bracket-Mounting, Right weight
1
— Washer 2
—
Bolt (5/8 x 2-3/4 inches)
2
— Weight-Suitcase 6
Install the weights.
— Bracket-Stabilizer 1
—
Bolt-Carriage (5/16 x 3/4 inch)
2
— Locknut (5/16 inch) 4
— Self-tapping screw (5/16 x 3/4 inch) 2
— Bolt (5/16 x 1 inch) 2
— Frame-Pivot 1
— Hairpin cotter 2
— Rod 2
— Washer 2
Install the attachment mount
— Latch rod 1
—
Hairpin cotter
1
Install the latch rod.
—
Bagger top
1
—
Bagger screen
1
Assemble the bagger top–All Deck
Sizes.
— Grass Bag 2
— Upper bagger tube 1
— Pivot bracket 2
— Bolt (5/16 x 1 inch) 4
— Nut (5/16 inch) 4
Install the bagger top.
— Chute 1
— Baffle (50-inch decks only) 1
Install the chute–All deck sizes.
—
Attaching the Discharge Tube–All
Deck Sizes
—
Fill out the online warranty registration
form.
Literature Pack
Manual-Operator's
© 2020—Exmark Mfg. Co., Inc.
415 Industrial Row
Beatrice, NE 68310
Part No. 4505-498 Rev. A
Printed in the Mexico.
All Rights Reserved
*4505-498* A