g300204
Figure 3
1.
5/16 x 3/4 inch carriage
bolt
2.
5/16 inch locknut
2.
Install the pivot frame to the machine frame as
shown in Figure 4. Secure the pivot frame to the
machine frame using two 5/16 x 1 inch bolts and
two 5/16 inch locknuts.
g300205
Figure 4
1.
Locknut (5/16 inch)
2.
Bolt (5/16 x 1 inch)
3.
Secure the pivot frame to the bottom of the machine
frame using two 5/16 x 3/4 inch self-tapping screws
as shown in Figure 5.
g300206
Figure 5
1.
5/16 x 3/4 inch self-tapping screw
4.
Install the bent, flared end of a rod into the keyed
slot in the left side of the machine frame, and move
the rod rearward to seat it in the frame (Figure 6).
Note:
Repeat this step for the right side of the
machine.
g300207
Figure 6
5.
Insert the bent ends of the rods into the attachment
mount as shown in Figure 6 and secure the end of
each rod with a washer and hairpin cotter.
Installing the Latch Rod
Install the latch rod with a hairpin cotter (Figure 7).
3
