ALWAYS test
the insulin flow
ALWAYS test the flow
before you inject.
Keep
testing until insulin squirts from
the needle tip. This makes sure
that any gap and air bubbles
are removed and that insulin is
getting through the needle.
• Select
2 units
and press the
dose button until the dose
counter shows “0”.
•
If no insulin appears
or there
is a gap in the insulin window,
repeat the insulin flow test. The
insulin flow test is complete
when you see insulin squirt and
there is no longer a gap
between the piston rod head
and the piston.
Select your dose
•
Pull out the dose button,
if
it is not already out.
•
Make sure the dose
counter shows “0“
before
you start.
• Turn the dose button to
select the dose you need.
You can turn forward or
backward.
Inject your dose
• Insert the needle into your
skin and press the dose
button until the dose
counter shows “0”.
•
Then wait and count
slowly to 6
before you
remove the needle from
your skin.
• Safely
remove and
dispose
of the needle.
Put the pen cap back on.
Do not store your pen with
a needle attached.
Wait and
count slowly
4
5
6
8-4251-31-001-X_v1-27:Layout 1 2013-06-28 10:42 AM Page In5
Page 329 of 387