![background image](http://html1.mh-extra.com/html/echo/gt-225sf/gt-225sf_operators-manual_4086675018.webp)
ASSEMBLY
GT-225SF
18
X7732275403
© 12/21 ECHO Incorporated
ASSEMBLY
Shield Installation
Parts required: Shield Assembly
Cut-off knife on debris shield has sharp edges. Avoid contact
when installing or removing line head.
Wear Gloves or personal injury may result:
◆
Cut-off knife is sharp.
◆
Gear case and surrounding area may be hot.
1.
Remove wing nut (A), washer
(B), and bolt (C).
2.
Snap the shield over the
bearing housing.
3.
Install bolt (C), washer (B), and
wing nut (A).
Support Handle
Note: Label (A) shows
minimum spacing for
Support Handle
location.
Note: Support Handle is pre-
installed. Re-
positioning and
tightening is all that is
required.
A
B
C
A