![background image](http://html1.mh-extra.com/html/echo/gt-225sf/gt-225sf_operators-manual_4086675024.webp)
OPERATION
GT-225SF
24
X7732275403
© 12/21 ECHO Incorporated
5.
Choke
After engine fires (or 5 pulls), move choke (B) to the RUN (
) (open)
position. Firmly grasp throttle handle with left hand and fully depress
throttle trigger to wide open position. Pull starter handle/rope until engine
starts and runs. Release throttle trigger and allow unit to warm up at idle
for several minutes.
Note: If engine does not start with choke in “RUN” position after 5
pulls, repeat instructions 2 - 5.
6.
Throttle Trigger
After engine warm-up, grip throttle handle and support handle. Gradually
depress throttle trigger to increase engine RPM to operating speed.
Starting Warm Engine
The starting procedure is the same as Cold Start except DO NOT close the
choke, and do not depress throttle trigger to wide open position.
The attachment should not move at idle, otherwise serious
personal injury may result.
Note: If attachment moves, readjust carburetor according to
“Carburetor Adjustment” instructions in this manual or see
your ECHO Dealer.
1.
Stop Switch
Move stop switch (A) away from
the STOP position.
A