![background image](http://html1.mh-extra.com/html/echo/gt-225sf/gt-225sf_operators-manual_4086675037.webp)
GT-225SF
MAINTENANCE
X7732275403
37
© 12/21 ECHO Incorporated
Lubrication
Level 1.
Parts required: Lithium Based Grease
1.
Remove shield.
2.
Loosen bearing housing
locating screw (A), at the top of
the housing, loosen mounting
screw (B) and remove gear
case from drive housing.
3.
Pull the flexible drive shaft (C)
from the drive housing, wipe
clean and apply 15 ml (0.5 oz.)
of grease.
4.
Slide the flexible drive shaft
back in the drive housing being
careful not to get dirt on the
flexible drive shaft.
5.
Install the bearing housing and shield.
Nylon Line Replacement
Wear gloves or personal injury may result:
◆
Cutoff knife is sharp.
◆
Gearcase and surrounding area may be hot.
Never use wire or wire-rope that can break off and become a
dangerous “projectile”. Serious injury can occur.
A
B
C