27
7.2 Carburetor adjustment
The carburetor is a vital part of the engine. Adjusting should be left to our
company authorized dealer with the professional knowledge, specialized date,
and equipment to do so properly.
7.3 Engine oil replacement
WARNING
• Avoid draining the engine oil immediately after stopping the engine. The
oil is hot and should be handled with care to avoid burns.
1. Place the generator on a level surface and warm up the engine for
several minutes. The stop the engine and turn the 3-in-1 switch
knob, fuel tank cap air vent knob to “OFF”.
2. Remove the screws (1) and then remove the cover (2).
3.
Remove the oil filler cap (3).
4. Place an oil pan under the engine. Tilt the generator to drain the oil
completely.
5. Place the generator on a level surface once again.
NOTICE
• Do not tilt the generator when adding engine oil. This could result in
overfilling and damage to the engine.
MAINTENANCE
1200I
2100I
Refilling Port
EGI1200
Summary of Contents for EGi-1200
Page 34: ...34 12 WIRING DIAGRAM WIRING DIAGRAM...
Page 41: ...41 NOTES...
Page 126: ...42 NOTES...
Page 127: ...43 NOTES...