Echo DPB-310, Operator'S Manual

Page: 7 / 244

3.6 RISK LEVELS
The following signal words and meanings are intended to
explain the levels of risk associated with this product.
SYM-
BOL
SIGNAL MEANING
DANGER Indicates an imminently haz-
ardous situation, which, if not
avoided, will result in death
or serious injury.
WARNING Indicates a potentially hazard-
ous situation, which, if not
avoided, could result in death
or serious injury.
IMPORTANT Indicates a potentially hazard-
ous situation, which, if not
avoided, may result in minor
or moderate injury.
NOTE Added to give more informa-
tion.
3.7 RECYCLE
Separate collection. You must not discard
with usual household waste. If it is necessa-
ry to replace the machine, or if it is no more
use to you, do not discard it with household
waste.
Separate collection of used machine and
packaging let you recycle materials and use
them again. Use of the recycled materials
helps prevent environmental pollution and
decreases the requirements for raw materi-
als.
At the end of their useful life, discard batter-
ies with a precaution for our environment.
The battery contains material that is danger-
ous to you and the environment. You must
remove and discard these materials separate-
ly at a location that accepts lithium-ion bat-
teries.
4 INSTALLATION
4.1 UNPACK THE MACHINE
WARNING
Read the operator's manual carefully to ensure that you
assemble the product correctly. Using a product that has
been incorrectly assembled could lead to an accident or
serious injury.
WARNING
• If parts of the machine are damaged, do not use the
machine.
• If you do not have all the parts, do not operate the
machine.
• If parts are damaged or missing, contact your dealer.
1. Open the package.
2. Read the documentation provided in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5. Discard the box and packing material in compliance with
local regulations.
4.2 INSTALL BLOWER PIPES
Figure 2.
1. Stand until upright on blower base.
2. Align locking ribs (A) on the blower pipe with recesses
(B) in fan case. Assure short locking rib (C) faces
upward. Slide the blower pipe into fan case until a
clicking sound is heard.
4.3 REMOVE BLOWER PIPES
WARNING
Screwdriver tip may stick out opposite side locking hole.
Figure2
1. Remove the battery and then remove the pipe
2. Insert screwdriver into hole (D) to release pipe lock.
3. Pull pipes out of fan case.
4. Remove screwdriver.
4.4 REMOVE THE BATTERY PACK
Figure 3.
1. Push and hold the battery release button.
2. Remove the battery pack from the machine.
5 OPERATION
WARNING
Make sure the blower tube is in position before operation.
5.1 START THE MACHINE
Figure 4.
1. When you pull the trigger, the machine moves and the
wind comes out of the blower pipe.
2. Adjust the trigger date amount as needed.
7
English Original Instructions
EN