OPERATION
CS-2511TN
34
X7503334400
© 11/22 ECHO Incorporated
8.
Turn choke control knob
clockwise to (OPEN
choke
position).
9.
Pull starter handle to start the
engine.
10. When engine starts,
immediately squeeze and
release throttle trigger to
release fast idle throttle latch.
Note: Do not pull starter rope out to maximum position. Do not allow
recoil handle to snap back against the casing. If engine does
not start after 5 pulls, repeat instructions.
Starting Warm Engine
Make sure the bar and chain are free from any obstruction when
starting the chainsaw.
1.
Move chain brake lever fully
FORWARD to LOCK chain
brake before starting.
2.
Confirm there is fuel and chain
oil in the tanks.
Throttle Trigger
Chain Brake Locked