ASSEMBLY
CS-2511TN
26
X7503334400
© 11/22 ECHO Incorporated
4.
Hold the bar nose up, and turn
the Tension Adjuster (A)
clockwise towards (+) until
chain contacts underside of the
bar.
5.
Tighten Bar/Clutch Cover Nut
with the bar nose held up and
under tension.
6.
Pull the chain around the bar by
hand. Loosen the Tension
Adjuster if you feel tight spots.
Tighten Bar/Clutch Cover Nut to 12 - 15 N•m (120 to 150 kgf•cm,
105-135 lbf•in). DO NOT over-tighten nut. Damage to saw can result.
7.
Assemble components in reverse order.
8.
Keep chain properly tensioned at all times.
Note: All chains require frequent adjustments.
A