Console Software
37
Console Software
Flash Update
The console will automatically update your firmware. If you want to re-flash your
hardware to this release of the firmware, click on "Flash update".
When you click this button, the console will load the current version of the
firmware into the box. Note that this will also erase any settings you have saved to
the flash memory.
AudioFire 2 and AudioFire 4 Playback Routing
The AudioFire 2 and AudioFire 4 now support routing playback from the computer
to different physical outputs.
Audio applications see the AudioFire’s outputs listed as "Playback 1" through
"Playback 6". Using the console, you can then route the playback channels to
either the analog outputs, headphones (AudioFire 2 only), or digital outputs. Each
playback pair can be independently routed to any of the outputs. You can also
duplicate playback pairs so the same audio goes to more than one set of outputs.
To change the routing, open the AudioFire Console. Select the Settings tab; near
the bottom of the window you will see the new routing control.