Connecting to the Audio Interface
14
Connecting to the Audio Interface
Connecting to the Audio Interface
The AudioFire 2, AudioFire 4, AudioFire 8, AudioFire Pre8 and AudioFire 12
audio interfaces contain a wide variety of connections that allow great flexibility in
operation. For optimal performance, it is critical to use the appropriate cabling and
connectors.
Analog Inputs and Outputs – AudioFire 2
AudioFire 2’s front panel has two analog line inputs (1 – 2), an amber power
indicator light, and an 1/8” stereo headphone output jack, with a corresponding
volume knob, which monitors analog outputs 3 and 4, labeled “Headphones” in the
AudioFire Console. The analog inputs operate with an input impedance of
10Kohms.
AudioFire 2 has two analog line outputs on the rear panel. The input and output
connections can be used with balanced or unbalanced cables via the ¼” connectors.
By default, the inputs and outputs are set to receive or send a +4dBu signal.
You can switch b4dBu and –10dBV for each individual input and output
via the console software (see section below).
