Echelon STRIDE-s, Instruction Manual

Page: 19 / 28

COnSOLE OpEraTIOn | 19
CONSOLE OPERATION (cont’d.)
Quick Speed
Quick speed has 3 buttons for 3km/h, 6km/h, and 9km/h (metric setting).
Quick speed has 3 buttons for 3m/h, 6m/h, and 9m/h (imperial setting).
Quick Incline
Quick incline has 3 buttons for level 3, level 6, and level 9.
Speed Control Buttons & Speed Control Buttons On Right Handlebar
Press “Increase” or “Decrease” buttons to adjust up or down the speed.
Min. speed: 0.8 km/h (0.5 m/h).
Max. speed: 19.2 km/h (12 m/h).
Emergency Stop
Always attach safety key clip to bottom of your clothes during workout. If any
emergency occurs, treadmill stops automatically when the safety key is pulled
out from the panel.
Incline Control Buttons & Incline Control Buttons On Left Handlebar
Press “Increase” or “Decrease” buttons to adjust up or down the incline level.
Min. incline level: level 0.
Max. incline level: level 12.
Switch Distance Unit
Press “PROG” and “MODE” together for over 5 seconds.
Find “F01” factory mode by pressing “SPEED CONTROL BUTTONS”. Press
“MODE” button to enter “F01.”
0 = Metric.
1 = Imperial.
Switch to preferred distance unit system by pressing “SPEED CONTROL
BUTTONS,” and then press “MODE” button to confirm the setting.