Echelon STRIDE-s, Instruction Manual

Page: 14 / 28

14 | aSSEMBLY
ATTENTION: Complete the following operations after making sure all screws are tightened and secure.
Move the treadmill unit out from the packaging box,
and place on a level surface.
Plug in the Power Cord (#C15) and insert the
Safety Key (#C13).
Hold left and right Handlebar (#A4) and lift it up
until you hear a “click” to lock the Left Upright/Right
Upright (#A3L/ #A3R) in the upright position.
For smartphone: Fix the Smartphone Holder (#B94)
on top of either water bottle holder, and place your
smartphone on top.
Hold left and right Handlebar (#A4) and push down
until you hear a “click” to lock it into position. Rotate
the Console Set (#B1) to the desired reading angle.
A3R
A4
A4
B1
A3L
C13
C15
B94
After installation, press the start button, adjust
speed level under 2 mph (3kph). Then check the
running belt to see if it runs smoothly or not.
Please refer to the Belt Adjustment section if the
belt is not running smoothly.
After thoroughly checking the belt, move the
treadmill to an appropriate location with ample
space for use.