ECG MTD 251 PBS, User Manual

Page: 66 / 80

65
EN
Installation of the turning plate
Cartridge (underside)
Glass turn-
ing plate
Assembled driving
collar
Axle of the driving collar
1. Never place the glass turning plate with the bottom
in the upward direction. The glass plate must always
turn freely.
2. Never use the oven without the driving collar and
the glass turning plate.
3. All containers with food must always be placed on
the glass turning plate.
4. If the glass turning plate cracks or the driving collar
is damaged, contact the nearest authorised service.
INSTALLATION
Remove all packaging material and take out all the accessories.
Check that the oven is not in any way damaged (dented or damaged door, etc.). Do not install the
oven if it is in any way damaged.
Kitchen bench top
Body of the oven:
Remove all protective foil from the surface of the oven.
Do not remove the light brown foil which is screwed into the inside of the oven. This foil
protects the oven's magnetron.
INSTALLATION
1. Place the oven on an even surface, which guarantees a suffi cient amount of free space for the
correct function of the ventilation openings.
30 cm
7.5 cm
7.5 cm
Opening
The distance between the oven and the nearest wall must be at least 7.5 cm.
At least one side must be free.
a) Leave at least 30 cm of free space behind
the oven.
b) Do not remove the legs of the oven.
c) Do not block the ventilation openings. The
oven could be damaged.
d) Place the oven as far as possible from a radio
or television.
The microwave oven can interfere with the
signal of the television or radio signal.
2. Connect the oven into standard electrical mains. Make sure that the specifi ed voltage and fre-
quency value specifi ed on the label of the oven conforms with the value of the voltage and fre-
quency in the mains.