![background image](http://html.mh-extra.com/html/ecg/mtd-201-gs/mtd-201-gs_user-manual_531185063.webp)
EN
62
EN
63
10. Rapid cooking
1) Press the
Start/+ 30 s/Confirm
button to start cooking at 100% for 30 seconds. The cooking
duration is extended by another 30 seconds with each press of this button.
The maximum setting is 95 minutes.
2) Press the “
Start/+ 30 s/Confirm
” button to extend the duration of microwave cooking, grilling,
combined cooking or defrosting.
3) Pressing the “
Start/+ 30 s/Confirm
” button to extend the process duration is not possible for
auto menu and defrosting according to weight set.
4) Turn “
” to the left - set the preparation duration directly. Start the cooking process by pressing
the
Start/+30 Sec./Confirm
button. Cooking power is set at 100%
11. Child lock
Lock Hold the
Stop/Cancel
button down for 3 seconds, a long beep will signal the child lock has been
activated and a lock will appear on the display.
Unlock: Hold the “
Stop/Cancel
” button down for 3 seconds, a long beep will signal the child lock has
been deactivated.
12. Checking the power
1) Press the
Micro./Grill/Combi.
button during the cooking process for 2-3 seconds and the current
cooking power will appear on the display.
2) Press the
Clock/Pre-Set
button during programmed cooking to see the time remaining before the
delayed start.
The time will flash for 2-3 seconds until the exact time will again appear on the oven display.
3) Press the
Clock/Pre-Set
button while grilling to display the current time. The time will be displayed
for 2-3 seconds.
13. Specifications
1) The oven will beep at the beginning after turning the knob;
2) Opening the door while cooking stops the cooking process. Press the
Start/+ 30 s/Confirm
button to continue cooking.
3) If you do not press the
Start/+ 30 s/Confirm
button after setting the cooking program, the
current time will be displayed. The setting is cancelled.
4) The oven beeps when a button is pressed properly, otherwise you did not press the button hard
enough.
5) The oven will beep five times to signal the process has ended.
Summary of Contents for MTD 201 GS
