ECG MTD 201 GS, User Manual

Page: 59 / 72

EN
58
EN
59
2. Connect the oven to a standard electricity network. Make sure the voltage and frequency on the
oven label corresponds with the network voltage and frequency.
ATTENTION: Do not install the oven above, or near the stove or near another source of heat. Placing
the oven by a heat source could damage the oven and result in losing the warranty.
The microwave oven should be used in an open space and should not be placed in
a cabinet.
The surface of the microwave oven can become hot during operation.
OVEN FUNCTIONS
Operating instructions
This microwave oven uses modern electronic controlling to configure cooking parameters to better
meet your needs.
1. Setting the time
As soon as you plug the microwave oven into the outlet, the oven display will flash “0:00” and a beep
will sound.
1) Press the Clock/Pre-Set button, the two digit number for setting the hours begins to flash.
2) Set the hours between 0-23 via “ ”.
3) Press the Clock/Pre-Set button, the two digit number for setting the minutes begins to flash.
4) Set the minutes between 0-59 via “ ”.
5) Press the Clock/Pre-Set button to complete the time setting process. The colon “ : ” will begin to
flash.
Note: 1) The oven will not function properly without the time begin set.
2) You can press the Stop/Clear button at any moment during the time setting and
the oven will return to its previous state.
2. Cooking in the microwave oven
1) Press the Micro./Grill/Combi. button, “P100” will appear on the display.
2) Press the Micro./Grill/Combi. several times or turn “ ” and select the cooking power from
100% to 10%. The display will successively show “P100”, “P80”, “P50”, “P30”, “P10”.
3) Confirm by pressing the Start/+30Sec./Confirm button.
4) Set the cooking duration by turning “ ” (time interval ranges between 0:05-95:00).
5) Start the cooking process by pressing the Start/+30Sec./Confirm button.
Note: When setting the cooking duration, the step between values from seconds to minutes
changes depending on the overall time. See the following: