![background image](http://html.mh-extra.com/html/ecg/ld-1327-k/ld-1327-k_user-manual_531237020.webp)
19
EN
The holder ha been designed to bear a max. weight of 15 kg. Mount the wall panel by means oft he
dowels and the mounting screws onto the wall or buy suitable instalation material for your wall. Fix the
monitor mounting plate with the tilt mechanism to your Tv by means oft he enclosed mounting screws.
if required, we recomend you to buy appropriate fastening material for your TV in a specialist shop. Con-
nect the wall bracket and the TV afterwards.
SAFETY WARNING
For proper mounting, plase have this bracket fi tted by a qualifi ed technician! Please ceck that the set is
complete before installation and ensure that none oft he parts are faulty or damaged. Use the bracket
fort he intended purpose only. Before installing the bracket, ensure that the wall on which the television
ist o be mounted is suitable fort he weight and please make sure that no electrical wires, water, gas or
other pipelines are located around the installation location. Please note in particular that the provided
wall anchors are only approved for concrete and brick walls. If the wall on which the television ist o be
mounted is made of other materials you should buy appropriate installation material from a specialized
dealer. Also observe the necessary safety clearence around the TV set (depends on the model). The
bracket may not be mounted at or above locations where persons could stand. Once you have mounted
the bracket and the fl at screen, check that they are suffi ciently secure and safe to use. You should repeat
this check at regular intervals (at least every three monts).
K+B Progres a.s. provides no warranty coverage and is not liable for damage resulting from improper
mounting or any damage resulting thereof.
WARNINGS
1. Make sure these instructions are read and thoroughly understood before attempting installation. If
you are unsure of any part of the installation process, contact a professional installer for assistance.
2. The wall or mounting surface must be capable of supporting the combined weight of the mount
and the display; otherwise the structure must be reinforced.
.3 Safety gear and proper tools must be used. Failure to do so can result in property damage and/or
serious injury.
4. Follow all instructions and recommendations regarding adequate ventilation and suitable locations
for mounting your display. Consult the owner‘s manual for your display for more information
TOOLS REQUIRED
Head Screw Driver
Electric or Portable Drill
1/8” (3 mm) Drill Bit and Stud Finder for Drywall Installation
5/16” (8 mm) Masonry Bit for Concrete Installation
HARDWARE KIT
(A) Drywall Screw (2
×
)
(B) Concrete Anchor (2
×
)
(C) Bolt M4
×
12 (4
×
)
(D) Bolt M4
×
30 (4
×
)
(E) Spacer (4
×
)
(F) Allen Key S3 (1
×
)
(G) Allen Key S4 (1
×
)