![background image](http://html.mh-extra.com/html/ecg/hk-120/hk-120_operating-manual_531294019.webp)
18
EN
19
DesCRIptIon
UsIng tHe AppLIAnCe
This straightener is equipped with a control slide that has the following positions:
0 = off
1 = low airflow (speed)
2 = high airflow (speed)
It is also equipped with the “
CARe
” (cool air) control slide suitable for fixing or drying hair. This slide has the
following positions:
Front = lower thermal power
Back = normal thermal power
Using cool air on the final drying phase is advised after fixating your created hairstyle.
note:
Using lower power is recommended for people with coloured, brittle, damaged and fine hair. To save
time and effort, using the maximum amount of heat, established on the highest setting, is recommended for
people with healthy rough, strong, exotic and resistant hair.
Round bristle brush
The round bristle brush is suitable for large-volume hair drying. The brush bristles are gentle towards hair.
Hanger
The hanger enables you to store the straightener, rendering it quickly available without taking up excessive
space.
CLeAnIng AnD MAIntenAnCe
Disconnect the appliance from the electrical output prior to performing any maintenance. Cleaning should
always be performed on a cooled down appliance and regularly after every use!
Wipe the straightener with a damp (not wet) cloth and dry with a soft dry cloth. Do not immerse the
straightener into water! Protect the straightener against dust, dirt and accumulated hair. Clean the air inlet
grille occasionally using a soft brush. Clean accessories by immersing them into soap water for a short period
and than clean with a small hairbrush, rinse and leave to dry. Lay them down shortly, cavity side down, to
remove any remaining water. Always make sure the straightener is completely cooled, clean and dry before
putting it away.
Round bristle brush
2 level speed/
temperature switch
Hanger
“CARE” slide (cool air)