![background image](http://html.mh-extra.com/html/ecg/ehi-7125/ehi-7125_instruction-manual_531087037.webp)
37
GB
APPLIANCE DESCRIPTION
View from above [A]
1. Cooking zone 160 mm: 1200/1500 W
2. Cooking zone 210 mm: 2300/2600 W
3. Cooking zone 180 mm: 1500/1800 W
4. Cooking zone 180 mm: 1500/1800 W
5. Cooking zone 190 × 380 mm: 3000/3600 W
6. Ceramic glass surface
7. Touch control panel
Control panel [B]
1. Cooking zone selection button
2. Special
functions
3. Off timer
4. Power/timer touch control
5. Turbo power button
6. Keylock
7. ON/OFF
switch
INSTALLATION
Attention
• Induction hob must be installed by qualifi ed person or technician in accordance with applicable regulations.
If necessary contact an authorized service. Do not perform this work by yourself.
• Before connecting to the power outlet, make sure that your network parameters correspond to the data on
the label.
• The hob must not be installed above the cooling equipment, dishwasher or clothes dryer.
• The walls around and above the hob must be heat resistant. All other materials, sealants and adhesives in
contact with the hob must be resistant to heat.
L (mm)
W (mm)
H (mm)
D (mm)
A (mm)
B (mm)
X (mm)
F (mm)
590
520
60
56
560+4
+1
490+4
+1
min. 50
min. 3
1. Make sure after unpacking that the hob is not damaged. In case of any doubt, contact your vendor or an
authorized service.
2. Cut space in the counter top according to the picture. The distance of the hob from the surrounding walls
depends on the type and surface of the walls. Do not use fl ammable materials close to the hob. For easy
installation and subsequent use you should keep at least 5 cm of free space around the cut out hob space.
The counter top thickness should be at least 30 mm.
Note
• Safety distance of the sides of the hob from the inner edge of the counter top should be at least
3 mm.
• The safety distance between the working surface of the hob and the cupboard above it must be at
least 760 mm.
Summary of Contents for EHI 7125
Page 2: ...A B ...
Page 51: ......