English
English
20
NOTE:
THE DURATION OF THE PROGRAM MAY CHANGE DEPENDING ON THE AMOUNT OF LAUNDRY, WATER
TYPE, AMBIENT TEMPERATURE AND SELECTED ADDITIONAL FUNCTIONS.
(*) The program water temperature is at the factory default setting.
(**) If your washing machine has a quick wash function, you can enable the quick wash option on the panel
and fill the machine with 2 kg or less of laundry and have it done in 30 minutes.
(***) Due to the short washing time of this programme, we recommend using less detergent. If the washing
machine detects an uneven load, the program may last longer than 15 minutes. You can open the
washing machine door 2 minutes after the end of the wash cycle. (This two-minute period is not included
in the duration of the program). According to Regulations 1015/2010 and 1061/2010, programme 1 is the
'standard 60 °C cotton programme' and programme 2 is the 'standard 40 °C cotton programme'.
•
The Eco 40-60 program can jointly clean normally soiled cottons with a recommended wash temperature
of 40 ° C or 60 ° C in the same cycle and is used to assess compliance with EU ecodesign legislation.
•
The most energy efficient programs are usually programs that wash for longer at lower temperatures.
•
Filling the household washing machine to the capacity specified by the manufacturer for the relevant
programs will contribute to energy and water savings.
•
Program duration, energy consumption and water consumption values may vary depending on the
weight and type of load, selected additional functions, type of water and ambient temperature.
•
It is recommended to use liquid detergent for washing programs that wash at low temperatures. The
amount of detergent depends on the amount of laundry and the degree of soiling. Follow the detergent
manufacturer's recommendations for the amount used.
•
The spin speed affects the noise and the residual moisture content. The higher the spin speed in the spin
phase, the higher the noise and the lower the residual moisture content.
•
You can access the product database, where model information is stored by reading the QR code on the
energy label.
•
Please refer to the last pages of this manual for a table of water and energy requirements for each
programme.
Important information
•
Use only detergents, fabric softeners and accessories suitable for automatic washing machines. Excessive
foam formed and the automatic foam absorption system was activated due to the use of too much
detergent.
•
We recommend regular cleaning of the washing machine every 2 months. Use the Drum Clean program
for regular cleaning. If your washing machine does not have the Drum Clean program, use the Cotton 90
program. If necessary, use only suitable descaling agents developed specifically for washing machines.
•
Never open the door while the washing machine is in operation. You can open the washing machine door
2 minutes after the end of the wash cycle.
•
Installation and repair work must always be performed by an authorized service representative to avoid
possible risks. The manufacturer is not liable for damage that may occur during processes performed by
unauthorized persons.
CLEANING AND MAINTENANCE
Warning
Before carrying out maintenance and cleaning, switch off the appliance and unplug the power cable.
Before starting maintenance and cleaning of the washing machine, shut-off the water supply.
Do not use solvents, abrasive cleaners, glass cleaners or all-purpose cleaners to clean the washing
machine. The chemicals they contain can damage the plastic surfaces of the appliance and other
components.
