33
ECCO Finishing AB
(the “Company”) shall provide the original purchaser (the “Purchaser”) with warranty
service against defects in material or workmanship for a period of one (1) year from the date of purchase of
the product, as follows:
Should you find defects in material or workmanship with regard to parts, ship them back to the Company,
freight prepaid. The Company shall repair or replace the parts free of charge and reimburse the freight
charges, provided that, as a result of an inspection and investigation of the parts conducted by the
Company, the defects are deemed to be to attributable to the factors within the Compan
y’s responsibility.
When, on the other hand, defects are found, as a result of inspection and investigation conducted by the
Company, to be attributable to natural wear, corrosion, negligence, accidents, an act of God, installation
contrary to the Compan
y’s instructions, abusive use or misuse, operation contrary to the instructions
appearing in the manual, or unauthorized modification, this warranty shall not apply. Neither shall it
apply to any services that are conducted outside Japan. In these circumstances, any costs that may be
incurred on repair or freight shall be the responsibility of the Purchaser.
In the event also of failure caused by use in conjunction with a hose or a gun, etc. of a maker not
approved by the Company, the warranty does not apply. In these circumstances, the Company will
submit a quotation for the costs of whatever corrective measures are necessary, repair or replacement,
including relevant terms and conditions.
As for items such as parts purchased by the Company from another manufacturer, the warranty of that
manufacturer shall apply.
As for any parts deemed to be defective, the Company shall not be held liable for any expenses beyond
the provision of replacement parts free of charge.
The Company shall not be held liable for any damage to the Purchaser caused by factors not
attributable to the Company, such as misuse of product, etc.
When a transfer of title of this equipment takes place, please see to it that this Operation and
Maintenance Manual is handed over to the new owner.
This equipment is manufactured in compliance with the Laws and Regulations of Europe.
In the rare eventuality of this equipment being used outside Europe, compliance with the safety standards
of the relevant countries is of course mandatory.
12
Warranty
