Page 4 of 15
6. Installation:
Check the contents of the shipping package and make sure the following items are included:
1 (or 2) Sensor(s)
1 Control Box
1 Buzzer (within 1m: 75.8db, 0.1m: 91.5db)
1 3m Monitor Transmission Cable
1 (or 2) 3m Sensor Transmission Cable(s)
1 0.9m USB to UART Cable
1 (or 2) Sensor Bracket(s)
1 USB Thumbdrive Camera Cable (included with camera kit, sold separately)
Buzzer
Connect Sensor Transmission Cable to Port C
and Camera Transmission Cable to Port D
on the Control Box
Monitor & camera systems are sold separately
Figure 2
6.1 Sensor Installation:
The radar sensor mounting location is important for proper installation. Ideally, the sensor should be mounted on the rear center of the
vehicle at roughly 3ft +/- 0.1ft (1m +/- 0.03m) above the ground and angled up 5° using the Silicone Pad. The sensor can be adjusted
horizontally with the mounting bracket.
5
˚
5
˚
Figure 3
Figure 4
(When mounted higher than 3ft/1m
IMPORTANT!
Before the Radar Detection System is permanently installed to the vehicle, verify that the sensor mounting location provides a
clear detection zone. Temporarily attach the sensor in the proposed mounting location, apply power to the system and verify that
nothing is being detected (ex: rear of the vehicle).
