24
Worklamp Modules
EZ1403WL
The EZ1403WL LED worklamp module provides high-intensity scene lighting to the front and/or rear of the vehicle. Install
these modules on the center DropLock
TM
power rail only. Press the front or rear worklamp button on the keypad controller
to operate these modules.
Remove the lenses to access the DropLock
TM
power rail system.
Install the worklamp module base in the center power rail
only. The worklamp module is intended for front facing
and/or rear facing illumination and should be placed in the
locations shown above.
Note: For the keypad worklamp buttons to function properly,
the front facing worklamp must be pointed toward the front
and the rear facing worklamp must be pointed toward the
rear.
1
FRONT
For correct operation, modules must be properly oriented
using the contact indicators on the base of the module. For
rear worklamps, the single contact indicator must face right
and forward worklamps, the single contact indicator must
face left when viewed from the rear of the lightbar (data port
on central control board faces rear of lightbar).
2
Single
Contact
Indicator
Double
Contact
Indicator
Summary of Contents for Axios
Page 1: ...1 ENGLISH ...