16
|
P a g e
E580 Defra instructions manual |
current as of May 2015
All information supplied by
Ecco Stove
TM
is a trade mark of Landy Vent UK Limited
copyright©EccoStove2015
Ecco Stove
| Foster House
| 2 Redditch Road,
Studley,
B80 7AX, United Kingdom
T
| +44 (0)1527 857 814
E
W
| www.eccostove.com
Patent pending USA, Canada, Europe & Russia | UK Patent nos: 2467433 & 2498883
APPLIANCE ASSEMBLY
Silicon Carbide parts are both heavy and can be damaged. Lifting by two people is
recommended.
a)
Base Section To be placed on a level structural
hearth capable of bearing 200kg. The hearth
must be laid level and the stove positioned a
minimum of 75mm away from a non-
combustible wall to allow space the outside
control assembly or 350mm from sides and 200
mm from stoves rear to a combustible
wall.
b)
Grate Section Fit cone shaped diablos into
the sockets of the base section to locate the
grate section. Place the grate section on and
bump into position with a rubber mallet to
bed in.
c)
Side Sections Place the cone shaped diablos
into the sockets on the grate section. Place
both side sections into place and bump
vertically down to bed in.
d)
Back Panel Fit the back panel between the
sides, it may help to spread the sides a little
at their tops to easily fit the back in.
Ensure the circular Tertiary hole is towards
