Chengdu Ebyte Electronic Technology Co.,Ltd.
User Manual
Copyright ©2012–2020
，
Chengdu Ebyte Electronic Technology Co.,Ltd.
27
图
4-1
图
4-2
(2) If the "CH340 driver" is not installed, enter the following steps. If already installed, skip this step.
Open the downloaded compressed package and decompress the folder (as shown in Figure 4-3 and Figure 4-4 below) →
find the compressed package with the words "CH340" and decompress it → double-click and click "SETUP.EXE" →
install → After the installation is complete, it will prompt " Driver installed successfully" → Finish
Figure 4-3
Figure 4-4
(3) Run the configuration software of "Interconnect Industrial Network IO Setting Tool.exe". (This setting tool supports:
Chinese and English)
Open the downloaded compressed package and decompress the file → find and double-click the "Inter-Transfer
Industrial Network IO Setting Tool.exe" to run the configuration software → If the operation is successful, the
installation is successful. (If opening fails, you will need to go to the next step.)
