Chengdu Ebyte Electronic Technology Co.,Ltd.
ECAN-U01 User Manual
Copyright ©2012–2022，Chengdu Ebyte Electronic Technology Co.,Ltd.
10
5
Communication
Interface
USB
Type B USB interface
6
CAN baud rate
Factory default 100K
——
6. Equipment usage
6.1. Connect with PC
The USB interface of ECAN-U01 conforms to the USB2.0 full-speed protocol specification, and can communicate with
PCs with USB1.1 and USB2.0 standards.
6.1.1. USB Bus Power Mode
The USB bus powered mode is suitable for most applications, for example, when the ECAN-U01 is the only device
connected to the USB port. Connect the PC and ECAN-U01 directly through the supplied USB cable, and 5V
power to ECAN-U01 from the USB cable . At this time, the indicators PWR and Work are on, indicating that the device
is working normally and is in the state to be connected.
6.1.2.
External power supply mode
The external power supply mode is suitable for the occasions where the PC uses a USB bus hub ( HUB ), or has
connected multiple USB terminal devices, so that the USB port cannot provide enough current to the ECAN-U01 .
Use an external power supply (DC8-28V) to connect to the power socket of ECAN-U01 , at this time the indicators
PWR and Work are on ; then connect the PC and ECAN-U01 through the supplied USB cable, ECAN-U01 can work
normally.
6.2. Connectwith CAN-bus
When ECAN-U01 is connected to the CAN bus, you only need to connect CAN_H to CAN_H and CAN_L to
CAN_L to establish communication.
The CAN-bus network adopts a linear topology, and the two farthest terminals of the bus need to be installed with
120 Ω terminal resistance; if the number of nodes is greater than 2 , the intermediate node does not need to be installed
with a 120 Ω terminal resistance. For branch connections, its length should not exceed 3 meters. The connection of
CAN-bus is shown in the figure.
Summary of Contents for ECAN-U01
Page 1: ...1 ECAN U01...
