Chengdu Ebyte Electronic Technology Co.,Ltd.
ECAN-U01 User Manual
Copyright ©2012–2022，Chengdu Ebyte Electronic Technology Co.,Ltd.
4
2. Quick Start
1. You need to prepare ECAN-U01 analyzer power adapter type B USB data cable.
First, the analyzer is installed with a power supply, and the user can choose USB bus power supply or power adapter
power supply according to their needs.
2. Connect the computer to the device through a Type B USB cable;
Open the debugging software, and enter the communication interface after configuring parameters such as the CAN baud
rate of the device in the configuration interface;
Connect the external CAN device to the analyzer. When ECAN-U01 is connected to the CAN bus, you only need to
connect CAN_H to CAN_H and CAN_L to CAN_L to establish communication.
Demonstration: Connect the CAN analyzer hardware, open the software and there will be a setting interface as
shown in the figure below.
Summary of Contents for ECAN-U01
Page 1: ...1 ECAN U01...
