background image

Chengdu Ebyte Electronic Technology Co.,Ltd.

ECAN-U01 User Manual

Copyright ©2012–2022,Chengdu Ebyte Electronic Technology Co.,Ltd.

16

9. Important Statement

Ebyte reserves the right of final interpretation and modification of all contents in this manual.
Due to the continuous improvement of the hardware and software of the product, this manual may be changed without
prior notice, and the latest version of the manual shall prevail.
Everyone is responsible for protecting the environment: In order to reduce the use of paper, this manual is only printed in
Chinese, and the English manual only provides electronic documents. If necessary, please download it from our official
website; We only provide product manuals according to a certain proportion of the order quantity, not every digital radio
station is equipped with one by one, please understand.

10.Revision History

Version

Revision date

Revision Notes

Maintenance man

1.0

2022.7.28

original version

LM

About us

Technical support: [email protected]
Documents and RF Setting download link:

https://www.cdebyte.com

Thank you for using Ebyte products! Please contact us with any questions or suggestions: [email protected]
-------------------------------------------------------------------------------------------------
Phone: +86 028-61399028
Web:

https://www.cdebyte.com

Address: B5 Mould Park, 199# Xiqu Ave, High-tech District, Sichuan, China

Summary of Contents for ECAN-U01

















Reviews: