60
EN
EBS Ink Jet Systeme
20150330#1.0
EN
Text Object
– Text File
The
Text file
text object is used to print the data saved in a TXT file.
Touch the
button and then the
button in order to
add a new,
Text file
-type text object to a project.
Touch the
File path
text field in order to roll-in a text file. On the screen
displayed, choose the file name out of those listed (or type in the file name in
the text field), and then touch the
button.
In the
Main
sheet tab you can set the following parameters:
Line count
– the number of lines to be added to the object from a text file.
Line step
– the number of lines by which text file data moves each time a
print is made. If the
Line count
is greater than the
Line step
, the data
moves by the number of lines given in the
Line count
.
Line maximum value
– the last line of a text to be included in a printout.
The
Start mode
parameter is used to define which line of a text file is to be
rolled-in after printer operation has been resumed. Two options are
possible:
Start value
– the line defined by the setting of the
Line start value
parameter is to be rolled-in,
Last value
– the line shifted by the
Line step
in relation to the line on
which printing finished is to be rolled-in.
Line start value
– the text line to be added to an object as a first one.
Line last value
– it indicates the line that has been printed as the last. The
line is memorized provided that the printer is switched off properly
– see
).
Touch the
button in order to add the object to a project or the
button to abandon the addition. If no changes have been made, you can return
to the previous screen by touching the
button.
