20150330#1.0
EBS Ink Jet Systeme
EN
125
EN
Reduce the setting of the
Dot size
parameter by touching the „-„ button (
) on
main screen of the printer or change it by modifying printing parameters
– see
).
Questions and Problems
Should you have additional queries after reading this operating manual, you can:
Browse the EBS Ink Jet Systeme, the printer manufacturer's web site
Try asking a question to the manufacture
r’s representative,
Present the problem in the contact form available on the manu
facturer’s
web site and forward the form following the instructions given therein.
Technical Parameters
P a r a me t e r
D e s c r ip t i o n
Number of nozzles
32
Nozzle diameter
150µm
as standard
optionally:
120µm, 170µm, 200µm
Print height
56 mm
Height of objects to be labeled
from 115 mm
(contact
with
both
rolls),
from 39 mm
(contact with the lower roll to
print with for example 7 nozzles only -
Working position in 3D space
any
Number of text lines per run
Up to 4 lines
Maximum number of characters
per text
Constrained by internal memory of the
printer
Number of projects
(stored in the
printer’s memory at the same time)
Constrained by internal memory of the
printer
Printing of graphics (logo,
special graphic characters)
Texts and graphic symbols can be edited
and printed with the application of True
Type fonts and also by means of UTF
–8
characters, as standard
Special characters
Diacritical characters, graphic characters
for information, warning, transport, etc.
purposes