20150330#1.0
EBS Ink Jet Systeme
EN
21
EN
See figure
4. If gasket
is dirty, remove ink leftovers from it with wash-up.
5. Install a new container - see
Installing Ink Container in the Printer
).
Ink may flow out of a worn out container. Secure the container valve with
transport cap
that you can take from a new container, in order to avoid
spontaneous outflow of the ink.
General Settings
The general settings are accessible by touching the following buttons in turn:
Tools
Settings
and
General
.
In the
Common
sheet tab you can:
Change the settings concerning the generation of
Statistics
. You can
collect the data on the number of prints made for each of the projects. The
report is available
EBS Web User Interface
in the
Info
menu
– see
).
Enable/disable the
Autostart current project
option
– after the printer has
been switched on, the recently printed project is read-in automatically, and
the printer moves to the
Print on (waiting)
state. Press the trigger and
move the printer along an article to be labeled in order to start printing.
Switch on/off the
Laser
, which is used for indicating the lowest nozzle
position. It is helpful in positioning the printer on the surface to be labeled.
The laser is on from the moment the project is enabled for printing and the
print release button is pressed until the printing of a given print is finished.
Switch on/off
EBS Cloud
, a tool that enables you to maintain and monitor
the state of the printer remotely.
Switch to the simplified menu
– see
).
Re-set the printer date and time settings by touching the
button
– see
).
