20150330#1.0
EBS Ink Jet Systeme
EN
103
EN
Touch the
button and then
to add a new,
Line
-type object to a project.
You can set the
Line thickness
in the range from 1 to 30. the
Line thickness
is given as a number of dots (pixels).
If the
Invert
check box is ticked, then where the
Line
”covers” another object
that might be in a lower layer, the common section of the line and that other
object is not printed.
Touch the
button in order to confirm the settings.
Shape-type Object
– Rectangle
With the
Rectangle
object you can print any rectangle: an outline only or the
entire figure (in the latter case the
Filled
check box needs to be ticked).
