20080908#3.0
EBS Ink-Jet Systeme
EN
7
EN
Some of the nozzles do not jet ink ... 27
Rinse the nozzles ............................. 27
The printer does not print ................. 28
Boldfaced or Blurred Prints .............. 28
Dear Users of EBS Ink-Jet System
H
equipment,
Please read this manual necessarily in order to get full information about the
operation of your device.
Disclaimer:
•
We shall bear no responsibility for damage to the device if it is operated improperly,
i.e., inconsistently with this manual.
•
As we wish to keep pace with permanently progressing technological development
and individual requirements of our clients, we need to reserve the right to change the
form, make and technical solutions of our devices. Therefore no data, illustrations or
descriptions of this manual shall form any grounds for claims.
•
We spare no effort to ensure that this manual is reliable, includes all modifications
and is free from errors. However, the drawing up and publication process is complex
and an error can occur in spite of our endeavours and wishes. We shall bear no re-
sponsibility for the consequences of editorial and printing errors in this manual.
If your device contains a particular piece of equipment or needs performing an operation
that have not been illustrated or described in this manual, or if you have queries on read-
ing this manual, please contact any representative of EBS Ink-Jet Systeme for additional
information.
!
EBS Ink-Jet Systeme, the manufacturer, shall not be responsible for dam-
ages to the device due to the operation that is inconsistent with the Operat-
ing Instructions or due to consequences of drafting or printing errors in
these Instructions.
The printer control program to be installed on your computer is a versatile tool for operating
EBS-200 series stationary printers and EBS 250 series manual printers. Therefore some of
its components and functions which (i) are used exclusively for EBS-200 series printers or
(ii) could be used in EBS-250 series printers but are of little significance for manual printers,
will not be described in these Instructions or will be described only briefly.
These instructions apply to EBS-250B printers with the control program
version 1.5.135. In order to check the version of your program view the
About
menu.
Operational Safety
!
Before you start your printer for
the first time read the hints
given below and follow the un-
derlying principles for your own
and other persons’ safety.
General safety instructions
1. The device must not be operated
in rooms where explosion hazard
exists.
2. No prints can be made on objects
whose temperature exceeds
100°C at the time of printing.
3. No open fire or spark producing
devices or objects are allowed in
