CPX200NB ALARM CONTROL UNIT – INSTALLER MANUAL
82 / 116
8.8.4.
Options
In this section you can enable additional options for sending SMS messages.
8.8.4.1.
Cooperation with the smartphone
This option should be selected if a smartphone application will be used for remote
operation of the control panel.
8.8.4.2.
Call before sending SMS
“Call before sending SMS” option should be selected if you need additional
information about the incoming SMS message. If this option is activated, before
sending an SMS the device “rings” the user to inform about the incoming SMS.
The connection attempt takes several seconds. The user can reject or accept the call.
If a user receives a call, the unit will disconnect the call. After trying to call, the
device sends an SMS message.
Sending a message to the first user (the first defined phone number), is followed by
an attempt to call the next user and send a message. And so on.
A voice call to a single user occurs no more than once every 15 minutes.
8.8.4.3.
Remove unsent SMS messages on partition disarming
If option is enabled, disarming the partition removes all waiting SMS, except the SMS
messages related to partition is still armed.
In other words, waiting (unsent) SMS messages related to disarmed partition and
related to the alarm system will be removed and will not be sent.
If the user disarm both partitions, all waiting SMS messages will be removed.
All SMS messages related to new events occurs after disarming, will be saved in
memory and sent as soon as possible.
Note: The producer does not recommend using this option because it reduces
security of the system. The option for use only by advanced users.
