H
oogkamerstraat 188, 9140 Temse Oos-Vlaanderen Belgium +32 470 80 80 83
22
5.
Make sure all your controllers (slave devices like MFCTH or MFCT in this case) have a
unique ID (which can be set from 1 to 247). You can do that by going to the menu of your
controller using the keypad as explained
6.
No make sure you didn’t attach any USB devices after connecting the USB to RS485 to
your PC and set the range of slave IDs you would like to search for on your network.
7.
If everything installed correctly, your will see your slave devices will appear on the list of
founded devices. You will see that after finishing the searching period, all devices will
update their measured values (temperature and relative humidity for MFCTH controllers
and only temperature for MFCT controllers).
By Clicking each of listed controllers a new window will get open with all Input and Holding
registers of the controller which you can set for your needs.
You always can return to the main form by clicking Exit button.