52
WORKING INSTRUCTIONS
EBERG REQU VERSION
Speed selection (1/2)
ON/OFF Main Switch (0/1)
1) Turning on
Once the installation, by qualified personnel has been completed, the product can be turned on, by setting the
“0/1” switch placed beside the main unit.
Make sure that the indicator light is turned on.
Once the shutter is open the product starts running 70 seconds in intake and 70 seconds in extraction.
2) Speed setting
It is possible to increase or decrease the air flow by using the “1/2” switch, placed on the product side.
Select speed 1 for a more silent air ventilation.
Select speed 2 for a faster air ventilation.
3) Wall Controls
Whether during installation performed by qualified personnel, the ON/OFF controls and speed setting are
connected with wall remote control, make sure that product controls are both set up on “1”.
Instructions for the wall remote controls are equal to those on the product here above.
4) Turning OFF.
Set on “0”the switch “0/1” placed on the product side.
If the controls are installed on wall set on “0” the switch on wall. Keep set on “1” the “ON/OFF” switch placed on
the product side.
