51
4) PRODUCT ASSEMBLY AFTER CLEANING
Re-mount the main unit (3) with the shutter (2) and front cover (1) on the wall-mounting (4i).
ATTENTION: if different products are cleaned at the same time, re-mount every principal unit in the specific
compartment from which they had been removed in order to avoid communication problems between Master unit
and Slave unit.
4a) EBERG REQU VERSION
Assemble the main unit and turn on the recuperator. The device is ready for operation.
4b) EBERG REQU+ VERSION
Once the main unit has been re-installed on wall, turn on the product by the main switch. The reset of the
cleaning counter must be driven by remote control.
How to reset after filter cleaning operation is explained in the controller instruction manual.
4c) EBERG REQU R+ VERSION
Once the main unit has been re-installed on wall, turn on the product by the main switch. The reset of the
cleaning counter must be driven by remote control.
How to reset after filter cleaning operation is explained in the controller instruction manual.
