8
9
EN
IXU 2000
Product installation need to be completed in accordance with below
tips:
•
Keep at least 180 cm of space from floor.
•
Keep at least 50 cm of space from ceiling and other walls.
•
Keep at least 100 cm of space from furniture, curtains and easily
flammable objects.
•
Make sure that the heating element is pointed towards area that
should be heated.
2. INSTALLATION GUIDELINES
24. Do not install the appliance near gas appliances or fireplaces. Do not store the flammable liquids,
paints, gas containers and similar near the device. Risk of fire and exposion!
25. The device should be installed in a place with easy access to the power socket. Avoid using extension
cords. Risk of overheating the device and causing a fire!
26. Make sure that power socket is suitable and tested for the outdoor use.
27. To turn off the device, set the ON / OFF button to the OFF position, then pull the plug out of the
socket. Please make sure to hold by plug, not by cable. Do not disconnect the device from the power
supply without switching off the main button first.
28. The device has been designed for home and private use. Do not use the device for commercial
purposes. Any other use than for the intended purposes may create a risk of fire, electric shock,
injury to persons or property damage.
29. Warning! This device is not equipped with a room temperature sensor. Do not use the device in small
rooms when occupied by persons not capable of leaving the room on their own, unless constant
supervision is provided.
30. 30. Check the wall before the product installation. Do not install on the damaged surface. Installation
can be made only on a solid walls that can support the weight of the unit.
31. Before installing, make sure that there are no electric, gas or water installations in the area of drilling
the holes.
32. Do not install the device directly next to electric, gas or water installations. Choose an alternative
installation location.
33. Do not install the device directly below a wall socket.
34. The device cannot be installed on the ceiling. Installation can be made only on walls.
35. Do not connect the device to external timers or independent control systems. Risk of incorrect
operation and danger.
36. When using the device outdoors, pay special attention on windy days to keep flammable objects
(such as foil, curtains, tents, flags) out of the device.
1.
LED light
2.
Main OFF/ON switch
3.
Installation handle
4.
Receiver of the signal from remote control
5.
Heating element
6.
Protection net
3. DEVICE DESCRIPTION