EN
10
www.eberg.eu
ETS 200
SELECTION OF THE INSTALLATION
SPOT
1.
In order to avoid any danger to a very young
children, it is recommended that the lowest
heating bar should be located at least 60 cm
above the floor.
2.
The device must be installed in such way that
the control panel of the device cannot be
accessed by a person in the bathtub or shower.
3.
Keep a distance of at least 60 cm from other
devices, 20 cm from the ceiling, and 25 cm from
other walls.
4.
The appliance should be installed in a dry place,
not exposed to direct contact with water, for
example on walls in front of or behind a toilet
or behind a door.
Note:
•
Product is suitable for operation only in „ZONE 3”.
•
Before drilling the holes, make sure that there are no electrical or other lines in the wall.
•
The device may not be mounted directly below a wall outlet. Danger of cable fires!
•
When drilling, ensure that sufficient space is left between the hole and the water lines located in the
vicinity. There is risk of water damage.
WALL MOUNTING INSTRUCTIONS
Note: The measurements shown are approximate. The fitter must check the final positions of holes are to
be drilled with the product itself and note rely solely on these dimensions.
450
640
