![Eberg ETS 200 User Manual Download Page 8](http://html1.mh-extra.com/html/eberg/ets-200/ets-200_user-manual_3754586008.webp)
EN
8
www.eberg.eu
ETS 200
Before installing and starting the appliance, read this manual and keep it for future reference.
DESIGNATION OF SYMBOLS
WARNING! Probable danger to life and risk of injury! Generally dangerous situation that may
lead to death or severe injuries.
PROTECIVE EARTH (GROUND)
DANGEROUS VOLTAGE
HOT SURFACE
SAFETY INFORMATION
•
The heater is only suitable for household use. Do not use it outdoors or for other purposes
inconsistent with its intended use.
•
This appliance is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have been given supervision
or instruction concerning the use of the appliance by a person responsible for their safety. Children
should be supervised to ensure that do not play with the appliance.
•
Do not overload the device by hanging too many towels or clothes on it. Do not cover the device
tightly. Fire hazard!
•
Do not install the towel rail in or near a shower or water spray, sauna or steam room.
•
Do not use strong chemical cleaning agents or solvents for cleaning.
•
In order to avoid a hazard for very young children, this appliance fixed on wall should be installed so
that the lowest on wall heated rail is at least 600mm above the floor, the stand alone one should be
kept away from children.
•
Clean the outside of the unit with a damp cloth. Never immerse the unit in water. On no account
should any household bleach, detergents, abrasive polishes or other cleaning agents be used on
these products.
•
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
•
To provide continued protection against risk of electric shock, connect to properly grounded supply
only.
ELECTRICAL NETWORK CONENCTION INTRUCTION:
•
Before connecting the device, make sure that the local voltage is identical to the voltage supported
by the device.
•
The device should be connected directly to an appropriate electric socket. Do not use extension
cords and multiple adapters. Risk of damaging the device!
•
Never touch the electric cord and plug with a wet hand. To disconnect the device from the electric