EPD 50 | EPD 70
EN
20
www.eberg.eu
Thank you for selecting our dehumidifier. Be sure to read this manual carefully before using it. Any qu-
estions, please contact the professional service for help.
Please keep this manual in a safe place so that it can be used in the future.
1. BEFORE USE
1.2. Product description
The dehumidifier is used to remove excessive moisture from the air. The resulting reduction in relative
humidity protects buildings and their contents from the adverse effects of excess humidity.
The environmentally friendly R290 is used as the refrigerant. R290 has no damaging influence on the ozo-
ne layer (ODP), a negligible greenhouse effect (GWP) and is available worldwide. Because of its efficient
energy properties, R290 is highly suitable as a coolant for this application. Special precautions must be
taken into consideration due to the coolant’s high flammability.
1.2. Symbols from the unit and user manual
The dehumidifier is used to remove excessive moisture from the air. The resulting reduction in relative
humidity protects buildings and their contents from the adverse effects of excess humidity.
The environmentally friendly R290 is used as the refrigerant. R290 has no damaging influence on the ozo-
ne layer (ODP), a negligible greenhouse effect (GWP) and is available worldwide. Because of its efficient
energy properties, R290 is highly suitable as a coolant for this application. Special precautions must be
taken into consideration due to the coolant’s high flammability.
This unit uses a flammable refrigerant.
If refrigerant leaks and comes in contact with fire or heating part, it will
create harmful gas and there is risk of fire.
Read the USER MANUAL carefully before operation.
Further information is available in the USER MANUAL, SERVICE MANUAL, and
the like.
Service personnel are required to carefully read the USER MANUAL and
SERVICE MANUAL before operation.
THE FOLLOWING SHOULD ALWAYS BE OBSERVED FOR SAFETY
1. It is strongly recommended that installation and service should be performed by a qualified technician.
2. The unit is designed only for use with R-290(propane) gas as the designated refrigerant.
3. The refrigerant loop is sealed. Only a qualified technician should attempt to service!
4. Do not discharge the refrigerant into the atmosphere.
5. R-290 (propane) is flammable and heavier than air. It collects first in low areas but can be circulated
by the fans.
6. If propane gas is present or even suspected, do not allow untrained personnel to attempt to find the
cause.
