Eberg AORI E25-09, Instruction Manual, Page: 47 / 76

AORI EN
47 www.eberg.eu
CLEAN SURFACE OF INDOOR UNIT
When the surface of indoor unit is dirty, it is recommended to use a soft dry cloth or wet cloth to wipe it.
Note!
Do not remove the panel when cleaning it.
CLEAN FILTER
1. Pull out the panel to a certain angle as shown in the
fig.
2. Remove the filter as indicated in the fig.
3. Clean filter
Use dust catcher or water to clean the filter. When the
filter is very dirty, use the water (below 45°C) to clean
it, and then put it in a shady and cool place to dry.
4. Installation filter
Installtion the filter and then close the panel cover tightly.
NOTE!
• The filter should be cleaned every three months. If there is much dust in the operation environment,
clean frequency can be increased.