Eaton xStorage Home 3P Instruction Manual Download Page 6

Page: 6 / 62

XSTORAGE HOME 3P INSTALLATION MANUAL

MN700009EN August 2020 www.eaton.com

00 Title

1.1 Field of Applications

This installation manual is intended for Eaton certified installers. It describes how to securely install and

commission the following Eaton xStorage Home three phase (3P) hybrid inverters (Table 1):

Table 1. xStorage Home 3P system overview

1.2 Symbols used in this manual

1.2.1 Safety related icons

1.2.2 Hazard icons

Imminent dangers causing serious injuries.

Danger of death.

An electric shock can be fatal.

Avoid touching internal or external normally live parts whilst the system is powered on.

Surfaces can be hot.

The equipment contains capacitors that store static electricity, which could produce dangerous

electric discharges. Make sure that the devices have discharged their energy before carrying

out any work on the equipment.

Electromagnetic fields may have harmful effects (unknown to date) on the health of people who

are subjected to long exposure. Avoid standing for long periods of time at less than 20 cm from

the inverter.

The Guards or covers can be removed only 10 minutes after disconnecting the

inverter from the power supply to allow its components to cool down and any static

electricity storage devices to discharge.

Hazardous behaviors that could cause serious injuries.
Hazardous behaviors that could cause death.

Behaviors that could cause minor injuries to people or

minor damages to things.

Eaton xStorage Home 3P

Power

Part Number

Product Description

5 kVA

XSTH3P050P075V01

XSTH Inverter 3Ph 5 kW PV 7.5

6 kVA

XSTH3P060P090V01

XSTH Inverter 3Ph 6 kW PV 9

8 kVA

XSTH3P080P120V01

XSTH Inverter 3Ph 8 kW PV 12

10 kVA

XSTH3P100P150V01

XSTH Inverter 3Ph 10 kW PV 15

Summary of Contents for xStorage Home 3P































































Search results

Summary of Contents for xStorage Home 3P

Reviews:

Related manuals for xStorage Home 3P

Brands by name

Popular brands

Eaton xStorage Home 3P, Instruction Manual

Search results

Summary of Contents for xStorage Home 3P

Reviews:

Related manuals for xStorage Home 3P

Brands by name

Popular brands