background image

 

59 

 

ROTARY TOW BEHIND      REV010322 

3.

 

The manufacturer offers this extensive warranty to the original purchaser of our trailers. The warranty starts from the point of sale 
ship date of the unit. 

The

 

manufacturer warranties 

the trailer main frame to the original licensed owner to be free from defects in 

material and workmanship with the following conditions: 

This 

LIMITED WARRANTY

 does not cover the tires, wheels(see section 5), 

suspension, paint/finish, lights, wiring or any other features outside of the trailer weldment, the correct operation of the tow bar, and/or 
the ball hitch mount and the Limited Warranty is determined by the following criteria: one year, to the original owner and is non-
transferable, limited to the first accident or overloading. This warranty also DOES NOT cover: 
 

a.

 

Products operated in excess of rated capabilities 

b.

 

Misuse, abuse, or accidents 

c.

 

Trailers that have been altered, modified, or repaired in any manner not authorized by the manufacturer. 
 

4.

 

The manufacturer warrants that each new product to be free from defects in material and workmanship for a period of one year from 
the date of delivery to the original purchaser except as noted below: 
 

a.

 

New products which have been operated in excess of rated capabilities. 

b.

 

Misuse, abuse, or accidents. 

c.

 

Items that have been pinched (air, electrical, or hose lines). 

d.

 

Any modifications or repairs not authorized by the manufacturer. 

e.

 

Second hand or used equipment. 

f.

 

Wear items such as tires, suspension, bearings, and trailer stand leg. 

g.

 

Products that have not properly been maintained. 

In no way shall the manufacturer be held liable for consequential damages such as rentals of substitute vehicles, loss of profits, downtime, or other 
commercial losses. This warranty covers shipment of trailer or parts to dealer or authorized repair center and shall include ground freight charges 
only for the first 90 days of the warranty period. 

5.

 

This Tire Limited warranty

 is offered by the compressor manufacturer for a period of 60 days from the delivery of the unit. The 

manufacturer’s

 obligation under this warranty is to repair or replace, at no cost to the end user, any warrantable part proven defective 

within the time limit of this warranty. The warranty on tires and wheels is limited to defects in their manufacturer and 

WILL NOT 

cover 

incidentals such as but not limited to: 
 

a.

 

Puncture from foreign materials. (nails, rocks, glass, screws, etc.) 

b.

 

Rupture from overfill. 

c.

 

Rupture or damage from use off road 

d.

 

Damage from improper mounting and or overloading 

e.

 

Damage from under inflation. 

f.

 

Damage incurred during accidents. 
 

6.

 

Kubota Engine America Corporation limited warranty on industrial engines and replacement parts. Kubota engines have a limited 
engine and powertrain warranty as stated below: 

To register your Kubota Engine please download the myKubota app from: 

Android

https://play.google.com/store/apps/details?id=com.kubotausa.mykubota

 

IOS: 

https://apps.apple.com/us/app/mykubota/id1434354490

  

Once in the app you will be prompted to scan the QR code located 

on the top of your Kubota Engine:  

 

KUBOTA ENGINE AMERICA CORPORATION LIMITED WARRANTY ON INDUSTRIAL ENGINES AND REPLACEMENT PARTS EFFECTIVE JANUARY 1, 
2009 OUR WARRANTY TO YOU

: We warrant to you, the original purchaser, that all parts (except those referred to below) of your new Kubota 

industrial engine and replacement parts purchased from an Authorized Kubota Industrial Engine Distributor or OEM Distributor in the United States 
and Canada will be free from defects in materials or workmanship during the following periods. 

Summary of Contents for S090ST
































































Reviews: