UPS SYSTEM INSTALLATION
Eaton
Power Xpert 9395P-600 (380V-600V) UPS Installation and Operation Manual
S
P-164000710 Rev 1
www.eaton.com/powerquality
4-9
NOTE
Four intercabinet interface wiring harnesses are supplied coiled inside the protective cage on the
right side panel of the ISBM section.
3.
In the ISBM section, locate the coiled wiring harnesses with the J50, J51, J61,
and J70 connectors attached. Remove the wire ties securing the harnesses and
carefully remove the harnesses from the protective cage. If necessary, loosen
the screws securing the protective cage.
4.
Locate the mating P50 connector in the UPM section wireway and connect the
P50 connector to the J50 connector.
5.
Locate the mating P51 connector in the UPM section wireway and connect the
P51 connector to the J51 connector.
6.
Locate the mating P61 connector in the UPM section wireway and connect the
P61 connector to the J61 connector.
7.
Locate the mating P70 connector in the UPM section wireway and connect the
P70 connector to the J70 connector.
