Eaton Power Xpert UX 12 User Manual Download Page 19

Page: 19 / 65

Product description

Power Xpert

UX with W-VACi circuit breaker 6063308 G01 01 14 July 2011 www.eaton.com

2.2.2

Bus-section panel (connecting panel)

The bus-section panel is used to separate or connect

parts of the installation (bus-sections).

The bus-section panel in the illustration consists of two

panels; one panel contains the circuit breaker, the other

panel is the bus riser panel. The Power Xpert

UX has

designs that allow for the bus-section to be mounted

either on the Left or the Right of the riser panel. An

additional option with Power Xpert

UX Switchgear is

that the bus riser panel can be supplied suitably

equipped with a number of units:

- Circuit Breaker

- Contactor

- Earthing Truck

- Voltage Transformer

- Disconnect/Isolation

Bus section Bus Riser

A. Sectionaliser panel

B. Riser panel right

C. Bus-section circuit breaker

Bus Riser + Bus sectionaliser

A. Riser panel left

B. Sectionaliser panel

C. Bus-section circuit breaker

Fig. 2-10 A bus-section and riser; the bay is two panels wide

Summary of Contents for Power Xpert UX 12


































































Search results

Summary of Contents for Power Xpert UX 12

Reviews:

Related manuals for Power Xpert UX 12

Brands by name

Popular brands

Eaton Power Xpert UX 12, User Manual

Search results

Summary of Contents for Power Xpert UX 12

Reviews:

Related manuals for Power Xpert UX 12

Brands by name

Popular brands