6
Instructional Leaflet
IL0131093EN
Effective January 2019
Instructions for secondary terminal blocks
EATON
www.eaton.com
Step 2:
To remove, grasp the terminal block alignment
bracket on each side and gently pull away from the terminal
blocks.
Figure 15. Step 2.
Step 3:
Slide the alignment bracket out from between any
mounted terminal blocks, and put it aside for re-installment
after new terminal blocks are connected to the mounting
bracket.
Figure 16. Step 3.
Grasp Here
Step 4:
Connect the bottom part of the terminal block to
the lower part of the mounting bracket. Ensure the terminal
block is positioned accurately.
Figure 17. Step 4.
Step 5:
Snap the top part of the terminal block onto the
upper part of the mounting bracket. Ensure the terminal
block is still positioned accurately and securely.
Figure 18. Step 5.
