Eaton PDI WaveStar Infinity 2 Monitoring System Setup and Operation Manual P-164001106—Rev 01
27
C
Chhaapptteerr 55 S
Seettuupp
After making network and local sensor connections, you should set up Infinity 2 operating parameters. Until
your network addresses are set up, you must use your unit’s 7" Touchscreen Display.
When you power-on your system or when a remote user connects to an Infinity 2 system, the first screen
displayed is the Infinity 2
HOME
screen. Select the tools symbol to display setup screens. The first screen
displayed then is always the
LIMITS
screen.
To make any Infinity 2 changes you must have administrator privileges, which you get by logging in. Select the
upper right side of banner (time/date/user) to display the log-in screen.
Changes are automatically saved except in certain cases where there is a
Save Changes
button.
NOTE
After pressing the
Save Changes
button, the monitor will reboot.
55..11
S
Seettuupp:: U
Usseerr A
Addm
miinniissttrraattiioonn
55..11..11
U
Usseerr A
Acccceessss P
Prriivviilleeggeess
There are two (2) privilege levels,
guest
and
administrator
.
•
Administrator:
Only administrators can set or change Infinity 2 parameters and only administrators must
log in. Any user logging in with a correct ID and password receives administrator privileges.
•
Guest:
Other users are designated as “guest” users and do not log in. Guest users can view most
screens, but they cannot change parameters. Update options and some setup screen command buttons
are greyed out for guest users to show that they cannot make changes or access the screen.
Summary of Contents for PDI WaveStar Infinity 2
Page 4: ......
Page 78: ...P 16400110601 P 164001106 01...
